Machine accessories

3 machines in stock

Manufacturers in stock

About: Machine accessories

Bar feeders and loaders, chucks, indexing tables and other equipment fitted to machine tools.

Machine-tool accessories complement an existing machine: bar feeders for lathes, chucks and collets, indexing heads and rotary tables, among others. Their value depends above all on their compatibility with the machine they are fitted to.

A bar feeder automatically supplies a lathe with round, square or hexagonal bars. A short bar loader, for bars of up to about 1.6 m, only pushes the material: the spindle guides it, which allows higher speeds, but the bar is limited to the spindle length. A long bar feeder, for bars of about 3.6 m, guides the bar in oil-filled channels; it needs fewer bar changes, but more floor space, and it limits rotation speed. There are models for fixed-headstock and sliding-headstock lathes, each for a given diameter range.

The chuck holds the part: three self-centring jaws for round parts, four independent jaws for non-circular shapes or very precise centring, a collet for accuracy on a given diameter. How it mounts depends on the spindle nose (threaded, tapered, standard cam-lock) or on an adapter plate. An indexing head or rotary table positions the part at a precise angle; when powered and run by the control, a rotary table adds a 4th axis to a CNC milling machine. Before buying, check the diameter range and bar length, the mounting interface and the footprint.

  • Entry level2 machines
  • Production machine1 machine

Frequently asked questions

Will a bar feeder fit my lathe?

Several points need checking: the lathe type (fixed or sliding headstock), the feeder's diameter range compared with the spindle bore, the bar length accepted and, for a short bar loader, the spindle length, which limits the bar length unless a spindle extension is fitted. The pusher's collet must also match the shape and diameter of the material.

Short bar loader or long bar feeder?

A short bar loader takes bars of up to about 1.6 m, cut to spindle length; it does not guide the bar, the spindle does, which allows higher speeds and takes less space. A long bar feeder accepts bars of about 3 to 3.6 m, often supplied at that length: fewer bar changes and no cutting to length, but a larger footprint, a speed limited by the oil guidance and a heavier load on the spindle.

Three-jaw chuck, four-jaw chuck or collet?

A self-centring three-jaw chuck quickly grips round parts. A four-jaw independent chuck, where each jaw is adjusted separately, holds non-circular sections and centres a round part very precisely, at the cost of a longer set-up. A collet usually gives better accuracy than a self-centring chuck and sets up faster than a four-jaw chuck, but most collets only take one diameter.

How do delivery and installation work?

The machines are stored in Haguenau, France. Loading, transport, positioning and recommissioning depend on the machine and on your workshop: give your address and access constraints in your request to get the applicable terms.

Can you take my current machine in part exchange?

Part exchange is considered case by case. Describe the machine in your request (brand, model, year, control, condition, photos): you will get an answer on whether and how it can be taken back.