Milling
51 machines in stock

Makino a61nx-5E

Deckel Maho DMU 100T

Feeler FV 800

Huron VX 12

Deckel Maho DMC 635V

Deckel Maho DMC 64 V

Deckel Maho DMC 63

Okuma MA-40HA

Deckel Maho DMU 70

Victor VCENTER 80

Huron KX 8

DMG MORI DMC 635 V

Deckel Maho DMU 60 T

Doosan NM 510

Mori Seiki MV 50 E

Deckel Maho DMU 50 eVolution

Quaser MK 60 II

Deckel Maho DMU 50 eVolution LINEAR

Deckel Maho DMU 70 eVolution

CME FC 1100

Hermle FP 1000

Huron MU 6

Deckel Maho DMU 70 eVolution

Hermle UWF 1001

TOS FGS 40 CN

Huron CX 10

Priminer DELTA CENTER V6L

Sundstrand RIGIDE MILL N°33

Lagun FBF 1200

Brother TC 211

YCM SUPERMAX WMC 1100 A

Kiwa EXEL CENTER MVP 21

Famup MCX 600

Famup MCX 600

Vernier GSP Trens CV 800

Chiron FZ12 WM

Famup MCX 700 P

Hartford VMC 1020

Yang Iron Works Eagle SMV 600

Kent Industrial KMV-10

Hartford VMC 1020

Famup MCX 1000-24

Hartford VMC 1020

Officine Meccaniche Sigma MISSION 2

Huron KX 10

DMG DMU 70 eVolution

Hermle C 800 P

Deckel Maho DMU 60 T

Deckel Maho DMU 35

Abawerk VLP 600

Ixion TL 600
About: Milling
Milling machines, vertical and horizontal machining centres, boring mills: the tool rotates and moves along several axes to machine prismatic parts, moulds and complex parts.
Milling removes material with a rotating tool, the milling cutter, which moves relative to the workpiece along the X, Y and Z axes; by convention, Z is the spindle axis. A milling machine can also drill, tap or bore, for one-offs as well as series. Depending on the spindle orientation, there are vertical, horizontal and universal milling machines, the latter with a swivelling head.
A machining centre is a CNC milling machine with an automatic tool changer and tool magazine, sometimes with a pallet changer. A vertical centre suits parts machined on one face and moulds; a horizontal centre, which clears chips and coolant better, suits heavy parts to be machined on several faces. A rotary table adds a 4th axis, a tilting head or table a 5th. The horizontal boring mill machines large parts, from a few hundred kilograms to several tens of tonnes, and their precision bores.
When comparing used machines, the X/Y/Z travels and the table size set the size of parts accepted. The spindle taper (SK, BT, HSK…) determines which toolholders can be used, and the spindle speed range must suit the materials and tools. The number of axes, the tool magazine capacity and the CNC control complete the comparison.
- Entry level
- Production machine
- High performance
Frequently asked questions
Vertical or horizontal machining centre?
The choice mainly depends on the shape and size of the parts and on the number of faces to machine. A vertical centre, where the cut is seen from above, suits parts machined on one face and moulds. A horizontal centre suits heavy parts machined on several faces, often with a rotary table and a pallet changer; its horizontal spindle also helps clear chips and coolant.
What difference does the spindle taper make?
The taper centres the tool in the spindle and sets the family of toolholders that can be used. CNC milling machines mostly use SK (or ISO), CAT, BT and HSK tapers; SK is the most common in Europe. BT, which is symmetrical, and HSK, whose clamping tightens as speed rises, are considered better at high speeds. A machine whose taper differs from your existing tooling calls for new toolholders.
What is a horizontal boring mill?
It is a machine with a horizontal spindle that bores, drills, counterbores and mills, mainly on large parts weighing from a few hundred kilograms to several tens of tonnes. Its spindle extends over a long stroke to reach deep bores, and some machines have a support or tailstock for long boring operations. It is used in particular for large manufacturing jigs and large precision parts.
How do delivery and installation work?
The machines are stored in Haguenau, France. Loading, transport, positioning and recommissioning depend on the machine and on your workshop: give your address and access constraints in your request to get the applicable terms.
Can you take my current machine in part exchange?
Part exchange is considered case by case. Describe the machine in your request (brand, model, year, control, condition, photos): you will get an answer on whether and how it can be taken back.


