Frequently asked questions

Buying, selling or moving a used machine tool: answers to common questions.

Buying a machine

Do used machines come with a warranty?

No. Used machines are sold as is, without warranty.

See also: General terms of sale

When do I pay for the machine?

Payment is made in full (100%) before the machine is collected.

See also: General terms of sale

Who pays for transport and unloading?

The buyer. Transport and unloading are at the buyer's expense, unless the buyer orders a handling service from Fimotec.

See also: Machine handling, General terms of sale

How do I know if a machine is still available?

Each listing shows whether the machine is available or sold. To be sure, send a request from the listing. We reply within 48 working hours.

See also: Machines

How do I get the price of a machine?

Prices are given on request. Send a price request from the machine's listing: we reply within 48 working hours.

See also: Machines

Can I ask about several machines at once?

Yes. Add the machines to your selection, then send one request for all of them.

The machine I am looking for is not in stock. What can I do?

Describe it in the contact form and choose "I am looking for a machine". We look for it for you.

See also: Contact

How do I choose a used machining center?

Start from your parts: their size sets the X/Y/Z travels and the table size, their material and tolerances point to the spindle power, speed and taper. Then check that your programmers know the CNC control and that the tool magazine is large enough for your operations.

See also: Machining centers and boring mills

3 axes or 5 axes: which to choose?

A 3-axis center machines one face per set-up; it suits simple prismatic parts and is easier to program. A 4th axis (rotary table) gives access to several faces, a 5th axis (tilting head or table) machines complex shapes in fewer set-ups, at the cost of CAM programming and a more expensive machine.

See also: Machining centers and boring mills

Vertical or horizontal machining centre?

The choice mainly depends on the shape and size of the parts and on the number of faces to machine. A vertical centre, where the cut is seen from above, suits parts machined on one face and moulds. A horizontal centre suits heavy parts machined on several faces, often with a rotary table and a pallet changer; its horizontal spindle also helps clear chips and coolant.

See also: Milling

What difference does the spindle taper make?

The taper centres the tool in the spindle and sets the family of toolholders that can be used. CNC milling machines mostly use SK (or ISO), CAT, BT and HSK tapers; SK is the most common in Europe. BT, which is symmetrical, and HSK, whose clamping tightens as speed rises, are considered better at high speeds. A machine whose taper differs from your existing tooling calls for new toolholders.

See also: Milling

What is a horizontal boring mill?

It is a machine with a horizontal spindle that bores, drills, counterbores and mills, mainly on large parts weighing from a few hundred kilograms to several tens of tonnes. Its spindle extends over a long stroke to reach deep bores, and some machines have a support or tailstock for long boring operations. It is used in particular for large manufacturing jigs and large precision parts.

See also: Milling

How do I choose a used milling machine?

The size of your parts sets the travels and table; the type of work points to a swivelling universal head or a fixed vertical spindle. For one-off parts a digital readout is often enough; for batches or complex shapes, prefer a CNC control.

See also: Milling machines

How do I choose a used CNC lathe?

The diameter and length of your parts set the turning diameter and distance between centers; bar work requires a large enough spindle bore and often a bar feeder. Also check the number of turret positions and the CNC control.

See also: CNC lathes

Driven tools, C axis, Y axis, sub-spindle: are they useful?

Driven tools and a C axis allow drilling, tapping and milling on the lathe; a Y axis adds off-center operations. A sub-spindle takes over the part to machine its back face. Together they let you finish the part in one set-up, but call for more complete programming.

See also: CNC lathes

How do I choose a used lathe?

The swing over bed and the distance between centers must cover your largest parts; the spindle bore sets the bar capacity. Check the speed and thread ranges against your work.

See also: Lathes

Conventional or CNC lathe?

A conventional lathe remains the simplest choice for one-off parts and repair. As soon as parts repeat or profiles get complex, a CNC lathe becomes more productive: see the CNC lathes family.

See also: Lathes, CNC lathes

What does the swing over bed mean?

It is the largest diameter that can rotate without touching the bed; it equals twice the centre height. It is not the diameter you can machine: the chuck jaws often stand out beyond the part, and outside turning takes place over the carriage, where the swing is often much smaller. Compare your parts with the swing over carriage, with the chuck and turret fitted.

See also: Turning

Fixed-headstock or sliding-headstock lathe?

On a fixed-headstock lathe, the part is clamped in the chuck and the tool moves along it. On a sliding-headstock (Swiss-type) lathe, the bar, held in a collet, moves back and forth through a guide bushing, past tools that stay at a constant distance from the support point. The part is supported right next to the cut: this lathe suits long, small-diameter parts that would deflect on a fixed-headstock lathe.

See also: Turning

What bar capacity do I need?

For bar work, the material passes through the hollow spindle: the spindle bore, or bar capacity, sets the largest usable diameter, together with the chuck or collet that clamps the bar. A bar feeder then supplies the lathe with bars automatically; its diameter range and the bar length it accepts must match the lathe. Choose the bar capacity from the largest bar diameter your parts need.

See also: Turning

How do I choose a used grinding machine?

The type of surface decides: surface grinding for faces, cylindrical grinding for outside and inside diameters. The size of your parts then sets the grinding area or length, and your tolerances the precision and equipment you need.

See also: Grinding machines

Surface or cylindrical grinder?

A surface grinder works faces on a table, often a magnetic chuck. A cylindrical grinder works round parts between centers or in a chuck. Some parts need both.

See also: Grinding machines

Why does wheel dressing matter?

As the wheel works, its grains get dull and its pores can load up with material. Dressing removes the worn grains to expose fresh ones, cleans the wheel and makes it concentric again, which limits vibration and improves surface finish. It is usually done with a diamond tool, with a single diamond or several. On a grinder, check that a dressing device is fitted and in good condition.

See also: Grinding, sharpening, honing, deburring, polishing

Grinding or honing?

Grinding removes material with a wheel to bring the part to size and shape. Honing is a finishing step, with abrasive stones held under pressure that rotate and reciprocate in the bore: it mainly corrects geometric form, also improves surface finish and can leave a cross-hatch pattern that retains oil, as in engine cylinders. It is also used for gears and air bearing spindles.

See also: Grinding, sharpening, honing, deburring, polishing

How do I choose a used deburring machine?

The working width and the minimum and maximum part sizes must cover your parts; the number of heads and automatic flipping determine whether both faces and edges are processed in a single pass.

How do I choose used peripheral equipment?

Start from the machine it will serve: bar capacity, loading length and footprint must match your lathe and your workshop.

See also: Special machines

How do I check compatibility with my lathe?

Compare the bar diameter, spindle center height and control interface with your lathe, and give your lathe's brand, model and control in your request.

See also: Special machines

Will a bar feeder fit my lathe?

Several points need checking: the lathe type (fixed or sliding headstock), the feeder's diameter range compared with the spindle bore, the bar length accepted and, for a short bar loader, the spindle length, which limits the bar length unless a spindle extension is fitted. The pusher's collet must also match the shape and diameter of the material.

See also: Machine accessories

Short bar loader or long bar feeder?

A short bar loader takes bars of up to about 1.6 m, cut to spindle length; it does not guide the bar, the spindle does, which allows higher speeds and takes less space. A long bar feeder accepts bars of about 3 to 3.6 m, often supplied at that length: fewer bar changes and no cutting to length, but a larger footprint, a speed limited by the oil guidance and a heavier load on the spindle.

See also: Machine accessories

Three-jaw chuck, four-jaw chuck or collet?

A self-centring three-jaw chuck quickly grips round parts. A four-jaw independent chuck, where each jaw is adjusted separately, holds non-circular sections and centres a round part very precisely, at the cost of a longer set-up. A collet usually gives better accuracy than a self-centring chuck and sets up faster than a four-jaw chuck, but most collets only take one diameter.

See also: Machine accessories

Condition, testing and visits

Can I see the machine before buying it?

Yes. The machines are stored in Haguenau, in the Bas-Rhin. Contact us to arrange the visit.

See also: Contact

Are the specifications in the listings guaranteed?

No. Specifications and makes are given for information only, as our general terms of sale state. Check the data that matter to you before buying.

See also: General terms of sale

Machining centers and boring mills: what to check before buying?

Check the spindle (noise, heat, runout, running hours), axis backlash and geometry, the condition of the guideways and covers, the tool changer over several cycles and the control. A power-on test, with a test part if possible, remains the best check.

See also: Machining centers and boring mills

Milling machines: what to check before buying?

Check the backlash of the screws and gibs, guideway wear, the spindle (noise, runout), the head and its adjustments, the power feed and, if fitted, the digital readout or CNC control. Run the machine at several speeds.

See also: Milling machines

CNC lathes: what to check before buying?

Check the spindle (noise, runout, heat), X and Z axis backlash, turret indexing and clamping, the chuck and its hydraulic unit, the driven tools if any, and the CNC control. A machining test shows the real condition.

See also: CNC lathes

Lathes: what to check before buying?

Check bed wear, carriage and screw backlash, the spindle (noise, runout), the feed and thread gearbox, the tailstock and the chuck. Run the machine at several speeds.

See also: Lathes

Grinding machines: what to check before buying?

Check the wheel spindle (noise, vibration), geometry and guideways, the chuck or workhead, the dressing device, the coolant and its filtration. A test pass shows the surface finish achieved.

See also: Grinding machines

Special machines: what to check before buying?

Check the loading mechanism, guide channels, safety devices and electronics; a bar loading test remains the best check.

See also: Special machines

Deburring / finishing machines: what to check before buying?

Check the heads and their drives, the conveyor, dust extraction and the condition of consumables; a test on your parts shows the result.

Payment and documents

Is a deposit required?

An order becomes final once confirmed in writing, with payment of a deposit where this is provided for.

See also: General terms of sale

Are prices quoted excluding VAT?

Yes. For used equipment, our offers are exclusive of VAT, for a machine taken from the floor of our warehouses.

See also: General terms of sale

When do I become the owner of the machine?

Once the price has been paid in full. Until then, the machine remains the property of Fimotec (retention of title).

See also: General terms of sale

Which documents come with the machine?

The invoice. For a used machine intended to be used, the seller also gives a certificate of conformity (see the Conformity section). The documentation available, such as the instruction manual, depends on the machine: ask for it with your price request.

How long do I have to make a claim?

No later than 48 hours after delivery, by registered letter. After that, the claim is not taken into account.

See also: General terms of sale

Conformity of a used machine

Which rules apply to the sale of a used machine in France?

The French Labour Code prohibits selling work equipment that does not meet the technical rules applicable to it (articles L4311-1 and L4311-3). A machine that was subject to the European design rules when new remains subject to them (article R4312-2). Other machines must meet the rules of articles R4324-1 and following.

Sources: Code du travail, article L4311-1 (code.travail.gouv.fr), Code du travail, article L4311-3 (code.travail.gouv.fr), Code du travail, article R4312-2 (code.travail.gouv.fr), INRS, ED 113 « Les machines d'occasion »

Must the seller provide a certificate of conformity?

Yes. When a used machine is sold to be used, the seller gives the buyer a certificate of conformity (article R4313-14 of the French Labour Code). According to INRS, this certificate follows the model of the order of 22 October 2009, is written in French and is issued for each sale.

Sources: Code du travail, article R4313-14 (code.travail.gouv.fr), INRS, ED 113 « Les machines d'occasion »

Must a used machine carry the CE marking?

It depends on when it was first put into service. According to INRS, a machine put into service from 1 January 1995 keeps its CE marking, and the seller hands over the original EC declaration of conformity and the instruction manual. Before 1 January 1993, the machine falls under articles R4324-1 and following and must not receive a CE marking. Between these two dates, both regimes were possible.

Sources: INRS, ED 113 « Les machines d'occasion »

And a machine imported from outside the European Economic Area?

According to INRS, it is regarded as new. It must carry the CE marking and come with an EC declaration of conformity, whatever its age.

Sources: INRS, ED 113 « Les machines d'occasion »

What can the buyer of a non-compliant machine do?

The buyer can ask for the sale to be cancelled within one year of delivery, even if the contract says otherwise (article L4311-5 of the French Labour Code).

Sources: Code du travail, article L4311-5 (code.travail.gouv.fr)

Transport and export

How do delivery and installation work?

The machines are stored in Haguenau, France. Loading, transport, positioning and recommissioning depend on the machine and on your workshop: give your address and access constraints in your request to get the applicable terms.

See also: Machine handling

Do you organise transport?

Yes, on quotation, anywhere in France. Transport is one of our handling services.

See also: Machine handling

Who bears the risks during transport?

The buyer. Goods travel at the consignee's risk. On arrival, check the machine and make your reservations with the carrier within 48 hours, by registered letter with acknowledgement of receipt.

See also: General terms of sale

What happens if the machine is not collected in time?

If the buyer does not collect the machine 15 days after the agreed availability date, Fimotec may ship it and invoice the shipping costs, or cancel the order.

See also: General terms of sale

My company is outside France. How does it work?

Contact us and tell us your country. Transport outside France is studied on request. Our Baden-Württemberg and Switzerland pages summarise the useful formalities.

See also: Service area

What formalities apply to a machine exported outside the European Union?

The machine is covered by an electronic export declaration. For the sale to be exempt from VAT in France, the exit from the Union must be proved, usually by the electronic exit certification (ECS). These formalities can be entrusted to a registered customs representative. They are given here for information only.

Sources: Commission européenne, procédure d'exportation, Entreprendre.service-public.gouv.fr, exportation hors de l'UE (F33167)

Selling your machine

Can you take my current machine in part exchange?

Part exchange is considered case by case. Describe the machine in your request (brand, model, year, control, condition, photos): you will get an answer on whether and how it can be taken back.

See also: Sell a machine

Which makes do you buy?

All makes. Describe your machine in the sell form.

See also: Sell a machine

How quickly do I get a reply?

Within 48 working hours, by email or phone.

See also: Sell a machine

Do I have to dismantle or load the machine myself?

No. We come to see the machine, then Fimotec takes care of collection and handling.

See also: Sell a machine, Machine handling

What information should I give to sell a machine?

The make, model, year, CNC control, condition and location of the machine. Add the equipment and your remarks.

See also: Sell a machine

How do I send photos of the machine?

By email or WhatsApp, with your request or in reply to our message. Photograph the rating plate, the CNC control and an overall view.

See also: Sell a machine

Machine handling

Which handling services do you offer?

Dismantling and reassembly, machine transfer and workshop relocation, loading and unloading, transport, positioning and installation, and the preliminary technical visit.

See also: Machine handling

Do you work outside Alsace?

Yes, anywhere in France. The quote depends on the distance.

See also: Service area

How is the price of a handling job set?

Every job is subject to a quote, based on the machine and the distance.

See also: Machine handling, General terms of sale

Do you visit the site before the job?

Yes, if needed. During the preliminary technical visit, we assess access and the site's constraints.

See also: Machine handling

Is Fimotec insured?

Yes, Fimotec is insured.

Who follows my handling project?

One contact person, from the quote to the positioning of the machine.

See also: Machine handling